FLYIN’ MONSTA

A new super pockety, tail whipping, steep faced rail holding bucketer.

previous arrow
next arrow
previous arrownext arrow
Slider

New for Fall ’18…The ever and oft-so-loved Monsta design with a new slightly pulled back outline and the extreme tail rocker and heavy single concave of the Flyin’ Lion applied to the bottom. A new super pockety, tail whipping, steep faced rail holding bucketer.

The ‘one board quiver’. The most versatile board for waves two foot to just overhead; mushy or hollow.It has become most surfers’ “normal everyday board for all conditions”.

  • FIN CONFIGURATIONthruster or five fin option to ride as tri or quad
  • WAVE PREFERENCESknee high and mushy to head high and hollow
  • AVAILABLE TAIL CONFIGURATIONS: wide rounded squash, wide hip-squash, swallowtail, round/thumbtail
  • RECOMMENDED RIDER TYPES: beginner to advanced

Todd’s picks for traction, fins, & other board essentials

Power Broker

 

Andy Irons Dakine Traction

 

Octopus Chippa Traction

Popular DimensionsVolumeRider Weight
4’7″ x 17 3/4″ x 1 3/4″16.85LRider weight: 40-80 lb / 18-36 kg
5’2″ x 17 7/8″ x 1 7/8″18.45LRider weight: 60-90 lb / 27-40kg
5’4” x 18 3/8” x 2 1/8”21.59LRider weight: 60-140 lb / 27-63 kg
5’5″ x 18 5/8″ x 2″ 22.1LRider weight: 60-140 lb / 27-63 kg
5’6” x 18 7/8” x 2 1/8”23.6LRider weight: 70-145 lb / 31-65 kg
5’6” x 18 7/8” x 2 1/4”24.99LRider weight: 75-160 lb / 34-72 kg
5’7” x 19” x 2 1/4”25.4-26LRider weight: 145-165 lb / 65-75 kg
5’7” x 19” x 2 5/16”26.3LRider weight: 145-170 lb / 65-77 kg
5’8″ x 19 1/4″ x 2 5/16″ (narrower nose)27LRider weight: 150-180 lb / 68-81 kg
5’8” x 19 1/4” x 2 5/16”28LRider weight: 155-185 lb / 70-3 kg
5’9″ x 19 3/8″ x 2 3/8″28.72LRider weight: 160-185 lb / 72-84 kg
5’9″ x 19 1/2″ x 2 3/8″30LRider weight: 160-190 lb / 72-86 kg
5’10” x 19 1/2″ x 2 3/8″ 29L+Rider weight: 160-195 lb / 72-88 kg
5’10” x 19 5/8″ x 2 3/8″29L+Rider weight: 160-195 lb / 72-88 kg
5’11” x 19 1/2″ x 2 3/8″28LRider weight: 165-190 lb / 74-86 kg
5’11” x 20″ x 2 1/2″+33LRider weight: 165-195 lb / 74-88 kg
6’0″ x 19 3/8″ x 2 1/2″ 30.8LRider weight: 165-195 lb / 74-88 kg
6’0″ x 19 3/4″ x 2 1/2″31.5LRider weight: 165-195 lb / 74-88 kg
6’0″ x 20″ x 2 1/2″ tapered rail31.5LRider weight: 165-195 lb / 74-88 kg
6’0” x 19 7/8” x 2 1/2”33LRider weight: 170-200 lb / 77-91 kg
6’0″ x 20 1/4″ x 2 5/8″ 33.7L+Rider weight: 170-200 lb / 77-91 kg
6’0″ x 20 1/2″ x 2 9/16″33LRider weight: 170-200 lb / 77-91 kg
6’0″ x 20 1/4″ x 2 7/8″ full38.43LRider weight: 175-220 lb / 79-99 kg
6’1″ x 19 1/2″ x 2 1/2″31.77LRider weight: 165-195 lb / 74-88 kg
6’1″ x 20 1/4″ x 2 5/8″33.9LRider weight: 170-210 lb / 77-95 kg
6’2 x 19 3/8 x 2 3/8 30.7LRider weight: 165-195 lb / 74-88 kg
6’2″ x 20 1/8″ x 2 5/8″ 32.8LRider weight: 170-210 lb / 77-95 kg
6’2″ x 20 1/8″ x 2 5/8″ full34LRider weight: 170-210 lb / 77-95 kg
6’3” x 20 1/2” x 2 3/4” 35LRider weight: 170-210 lb / 77-95 kg
6’3” x 20 1/8” x 2 5/8” 35LRider weight: 170-210 lb / 77-95 kg
6’3 x 20 3/4″ x 2 3/4″+39.29LRider weight: 180-240 lb / 81-108 kg
6’4″ x 20″ x 2 1/2″ 34.58LRider weight: 170-210 lb / 77-95 kg
6’4″ x 20 1/2″ x 2 5/8″38LRider weight: 180-220 lb / 81-99 kg
6’5″ x 20 1/4″ x 2 3/4″38.36LRider weight: 180-220 lb / 81-99 kg
6’5″ x 21 1/4″ x 2 7/8″42.8LRider weight: 180-220 lb / 81-99 kg
6’6” x 21” x 2 5/8” 39LRider weight: 170-230 lb / 77-104 kg
6’6” x 21” x 2 3/4” 40.5LRider weight: 170-230 lb / 77-104 kg
6’8” x 21 1/2” x 3” 46.7LRider weight: 180-240 lb / 81-109 kg
6’10” x 20” x 2 5/8” (sleek)38.4LRider weight: 115-200 lb / 52-90 kg
7’0” x 21” x 3” step-up50LRider weight: 190-250+ lb / 86-113 kg
7’6” x 22” x 3 1/4”54.29LRider weight: 200-250+ lb / 90-113 kg

Ride Da Monsta 3-4 inches shorter and 1/2” wider than your standard good waves shortboard

construction options & pricing

Polyester/Polyurethane

$725+
traditional foam & fiberglass - starting at ...

Proxy epoxy/EPS

$875+
3-5 x the strength & durability of a poly, lighterweight & slightly more buoyant

Carbon Footprint

$1025+
stringerless Proxy epoxy with carbon reinforced rails

Titanium II Series

$1025+
any of our Proxy epoxy iterations with the additiona of strategically placed carbon/kevlar mesh
talk-to-shaper.png

how to get your board

ordering options

Ready to Ship >> from Stock

Custom Order & Detail your Board directly with Todd >>

Order Stock Quick >> 2 week build

Customize your Board >> in the Online Shop

Stoked surfer reports: this just in >> "I was able Stoked surfer reports: this just in >> "I was able to take the new board out this past Saturday at C St.... it is totally awesome!  There was a dude in the lineup who was asking me about the board, its dimensions and where I got it.  He said it was noticeably quick.  He was right…the board can take off late/deep and still make the sections and/or skate around the froth ahead.  Really digging it! 
Job well done!  Again!!" —John 5'7" x 19 1/4" x 2 5/16" 27L #monstasurfboard with #greasedpigsurfboard v4 rocker #hipsquash #surferfeedback

Stoked surfer reports: this just in >> "I was able to take the new board out this past Saturday at C St…. it is totally awesome! There was a dude in the lineup who was asking me about the board, its dimensions and where I got it. He said it was noticeably quick. He was right…the board can take off late/deep and still make the sections and/or skate around the froth ahead. Really digging it!
Job well done! Again!!" —John 5'7" x 19 1/4" x 2 5/16" 27L #monstasurfboard with #greasedpigsurfboard v4 rocker #hipsquash #surferfeedback

194 1

Marley's 5'8 x 19 1/4 x 2 5/16 #titanium2 #monstasurfboard // 27/5'11"/165 lb #americansurfboardfactory

126 4
Here’s a 6’1” x 19 3/4” x 2 5/8” 33.5L # Here’s a 6’1” x 19 3/4” x 2 5/8” 33.5L #Monstasurfboard outline blended with (my new favorite) a #Flyinpigsurfboard rocker and bottom...for Andrew who lives, well, all over the place. He’s got a spot in Costa, a crib in Indo, and a few other places too...this board is for Indo; a little spot just outside of Canggu...for the average head high to slightly overhead days, and for getting into the barrel easy and early, with a wide open sweet spot, a drivey board that will do crisp gafs in the pocket; an “easy” board that lets you get speed easy, but will also carve it up lightning fast...so that’s how I came up with this design combo cause that’s just what it does :) It’s epoxy with a high density foam tensioner down the center for a smoother ride than typical epoxy, yet maintains that nice lively whippy feel in maneuvers that’s so nice about epoxy. There’s strategically placed carbon down the center and on the tail to keep the “stompin’ spots” from crushing out. 
I met Andrew years ago in Peru on a really good swell run. We’ve been dialing in different boards for different waves for a good stretch since that time. It’s always fun to catch up on his travels and the different wave locales he’s sampling, and to dial in the specialized tune-ins for his sheath of arrows on his unique surfing journey. 
Andrew is 30-something, 6’1”, 190lbs. 
#customsurfboards #thecustomdesignprocess

Here’s a 6’1” x 19 3/4” x 2 5/8” 33.5L #Monstasurfboard outline blended with (my new favorite) a #Flyinpigsurfboard rocker and bottom…for Andrew who lives, well, all over the place. He’s got a spot in Costa, a crib in Indo, and a few other places too…this board is for Indo; a little spot just outside of Canggu…for the average head high to slightly overhead days, and for getting into the barrel easy and early, with a wide open sweet spot, a drivey board that will do crisp gafs in the pocket; an “easy” board that lets you get speed easy, but will also carve it up lightning fast…so that’s how I came up with this design combo cause that’s just what it does :) It’s epoxy with a high density foam tensioner down the center for a smoother ride than typical epoxy, yet maintains that nice lively whippy feel in maneuvers that’s so nice about epoxy. There’s strategically placed carbon down the center and on the tail to keep the “stompin’ spots” from crushing out.
I met Andrew years ago in Peru on a really good swell run. We’ve been dialing in different boards for different waves for a good stretch since that time. It’s always fun to catch up on his travels and the different wave locales he’s sampling, and to dial in the specialized tune-ins for his sheath of arrows on his unique surfing journey.
Andrew is 30-something, 6’1”, 190lbs.
#customsurfboards #thecustomdesignprocess

185 4
Robby's happy set headed off to Florida | 5'10" x Robby's happy set headed off to Florida | 5'10" x 18 3/4" x 2 1/4" 26L Monsta v2 Inverted Fulcrum & 6'0" x 18 5/8" x 2 1/4" 25.5L G4-71 | 40/5'10"/155lb/25 yrs exp #monstasurfboard #invertedfulcrum #g471surfboard

Robby's happy set headed off to Florida | 5'10" x 18 3/4" x 2 1/4" 26L Monsta v2 Inverted Fulcrum & 6'0" x 18 5/8" x 2 1/4" 25.5L G4-71 | 40/5'10"/155lb/25 yrs exp #monstasurfboard #invertedfulcrum #g471surfboard

237 1
Built by hand at the American Surfboard Factory. T Built by hand at the American Surfboard Factory. This one ☝️ (by special request) for Eric in New Jersey ...a 6'5" x 21 1/4" x 2 7/8" 42.8L #monstasurfboard version 1.3 epoxy with resin colors and carbon...for 3-6ft pointbreaks worldbound. Eric is 48, 5'10", 180 lbs. Surfing for 7 years.

Built by hand at the American Surfboard Factory. This one ☝️ (by special request) for Eric in New Jersey …a 6'5" x 21 1/4" x 2 7/8" 42.8L #monstasurfboard version 1.3 epoxy with resin colors and carbon…for 3-6ft pointbreaks worldbound. Eric is 48, 5'10", 180 lbs. Surfing for 7 years.

236 1

6'4" x 21 1/2" x 3" Monsta hipsquash for Josh for Ventura/LA county | 34/5'9"/190-200/15 yrs off & on #sharkrepellentzebrastripes in resin #monstasurfboard

165 0
This error message is only visible to WordPress admins

Error: API requests are being delayed. New posts will not be retrieved for at least 5 minutes.